frequency control products type dfn s11-el/ed revision 02 checked ne date 19.07.2007 page xx surface mount clock oscillator dfn s11-elpi (3.3 v) & dfn s11-edpi (2.5 v) features 10 to 200 mhz fundamental and 3 r d overtone mode crystals low jitter applications datacomms function dfn s11 e / d 1 nc 2 gnd 3 output 1 4 output 2 5 vcc 6 6 4 3 1 5.08 h0.2 2.4 1.4 2.0 5.00.2 2.4 l0.2 5.08 1.4 2 5 l 7.5 mm h 1.7 mm pc board footprint type dfn s11-elpi dfn s11-edpi frequency range 10 to 200 mhz electrical specifications supply voltage 3.3 v 5 % 2.5 v 5 % supply current (no load) 120 ma output load lvpecl ( 50 to 1.3 v ) lvpecl ( 50 to 0.5 v ) duty cycle @ 50% level 45/55?55/45 % 45/55?55/45 % rise/fall times ( 20 to 80% ) 2 ns 2 ns high/low levels 2.27 v/ 1.68 v 1.47 v/ 1.09 v jitter rms (12 khz to 20 mhz) 1 ps 1 ps enable / disable on pin 1 high or open = enable, low = disable high or open = enable, low = disable complementary output on pin 5 180 phase shifted 180 phase shifted start up 10 ms @ 3.15 v 10 ms @ 2.37 v frequency stability stability [ ppm ] and temperature code types temperature range stability code stability code stability code all types 0 to 70c 25 xb25 50 xb50 100 xb100 -40 to 85c 50 xe50 75 xe75 100 xe100 remarks stability includes calibration at 25c, temperature, ageing, vcc and load changes 1 s t yr. options stability over long life time a = 5 years b = 10 years c = 15 years ordering code type + option code + frequency + stability/temperature code example dfn s11-elpi 155.52 mhz xe50b remark please consult factory for life time/stabilities possible combinations
|